Rectifier Power Supply|low Voltage High Current Power Rectifier ZHS-45000A/670V for Electrochemical

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Beijing
Validity to: Long-term effective
Last update: 2017-10-19 19:12
Browse the number: 98
inquiry
Company Profile
 
 
Product details

Technical Parameters of High Current Rectifier (HCR)mode ZHS-45000A/670V

Model

ZHS-45000A/670V

Efficiency

≥99.4%

Input Voltage

AC35KV

Rated Voltage

DC670V

Input Current


Rated Current

DC45000A

Range of Regulation

 

On-load Voltage + Switch  Regulation: 15%-105% Udn

Notes for Order

 

Input Voltage

AC300V-330KV

Optional

Frequency

40-60Hz

Optional

Current Regalation


Optional

Voltage Regulation


Optional

Rated Current


Optional

Rated Voltage


Optional

Cooling Mothed

Water,Air,natural or Forced

Draft Cooling

Optional



Digest of High Current Rectifier(HCR)technical documents.

Part two of Installation and Operation Instructions of KHA—150A/150V Polarization Power Supply Devic

Ⅱ.Working Principle:

      The circuits of this device can be divided into main circuit and control circuit.

2.1 Main circuit:

    As shown in the figure, the three-phase bridge rectifier circuit is used as the main circuit, the valve side of which is equipped with opening and closing surge absorber circuits and each arm is centrally provided with commutating overvoltage protection circuit. The three-phase AC voltage is reduced through a rectifier transformer and rectified by a thyristor before outputting the DC current 150A and voltage 150V.

2.2 Control circuit: (as shown in the figure)

    It is composed of the fault signal detection circuit and trigger circuit.

2.2.1 Fault signal detection circuit:

Current overload: in case of major loop circuit overload, the trigger pulse will be blocked until fault clearance.

2.2.2 Trigger circuit

1) Product outside view:

2) Basic technical parameter

l Nominal line voltage at the main circuit valve side: ≤600V(45∽55HZ)

l Controller working power supply: single-phase AC 220V±10%; current A≤0.0.12A or DC power supply DC24V/1A,DC5V/0.5A

l  Controller synchronizing signal: three-phase synchronous, AC24~380V, 45∽55HZ, current A≤5mA

l Voltage feedback signal: DC 0∽10V

l Current feedback signal: DC 0∽5V

l Analog quantity A/B spare channel: DC 0∽5V

l Analog potentiometer interface: self supplied power source, each interface can only connect a potentiometer with R≥10K.

l Digital potentiometer interface: switching value, self supplied power source, each interface can connect two passive 

buttons, one for increase and the other for decrease.

l 4-way switch input node: self supplied power source, not mixed with other power sources

l 4-way switch output node: passive relay output (normally open node) 24V/1A

l Pulse phase shift range: rectifier operation α=0~180°, inversion operation β=30~90°

l Pulse asymmetry degree of each phase: ≤0.3°

l Trigger pulse characteristics: voltage >6.5V, peak current >800mA

l Pulse signal width: 18° wide, double-narrow pulse train, interval 60°

l Number of output pulse ways: 12-way modulated trigger pulse isolated output

l Soft start/soft stop time: 0~120s adjustable

l Maximum boundary dimensions: 200㎜×180㎜×40㎜‘


 

High Current Rectifier(HRC)ZHS-45000A/670V Structure Feature & Advantages


▲Over / low Voltage protection    

▲Over / low current protection   

▲Over / lack water protection        

▲Over temperature protection

▲Fast fuse protection      

▲Phase protection  

▲ Adopted cophase counter parallel connection Rectification,wihich can increase the power factor and reduce power loss

▲ Three-phase bridge rectification,which has the characteristics of reliability,stability,and low losses

▲ Adopted aluminum frame and glass antimagnetic cabinet, which suit for monitor and maintenance

▲ Power is scalable

▲ Can be maintained with electricity.

▲ With Low noise 

▲ Easy to operate 

▲ Superiority of Ture Rdundancy technique

 

Our products of High Current Rectifier (HRC) are customized according to clients’s parameters.They are used in variety of applications as follows:

1.Plating: Chrome, Zine, Nickel, Copper, Gold, Silver

2.Metal smelting: Aluminum, Copper,  Zine, Lead, Manganese, Magnesium, etc.

3.Ionic membrane: Electrolysis of salt, etc

4.Silicon carbide smelting & Graphitization furnace

5.Experimental power supply

6.Copper foil, aluminum foil special power supply

7.Electrochemical: Chlor-alkali, etc

8.Electrolysis: Copper, Zine, Tin, Lead, Aluminum foil, Copper foil

 

The expert teams with 20 years experience can supply equipment design,manufacture, upgrading and after sales service. It’s quality management system meets the requirement of the ISO9001:2008 standard. The Technical level of main equpment is ten years ahead in China,and the control system is twenty years ahead at home and abroad.

We service with pride and care and give you a best solution.

 

 

Packing Details:In iron sheet case with waterproof and anti collision treatment

Delivery Details: 1-3 months, depending on your technical parameters

 

Please give us the follows technical information before order:

1  A.C. INPUT

• A.C: rated voltage

• Phases

• Frequency

2  D.C. OUTPUT

• Rated D.C. voltage

• Rated D.C. current

• D.C. voltage fine control range (thyristors)

• D.C: current control range

• Accuracy of current fine control

• Pulse number

• Ripple

 

1. Within the first year, if you need any spare parts for replacement, we can provide to you without

paid. And we will offer lifelong technical support and service.

 

2. Within the first year, if you need any spare parts for replacement, we can provide to you without

paid. And we will offer lifelong technical support and service.

 

 

1.Q:Are you a factory or trading company?
A: We are a factory.

 

2. Q: Where is your factory? How can I visit there?

A: Our factory is located in Xi’an, middle part of China, about an hour bus ride from Xi’an Xianyang Airport, which in the starting point of Ancient Silk Road.Welcome to visit us.

 

3. Q:When can I get the price?

A:Usually we quote within 24 hours after we get your inquiry.


Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]